Nord Makina Tasarım

Technical Informations

Hydro Test (M-01) provides the opportunity to realize the hydrostatic pressure tests electronically of the various fire extinguisher cylinders and oxygen tubes.

Hydro Test (M-01) is used for the pressure testing of single cylinder with a test pressure up to 500 bar. Pressure testing is necessary to ensure safety by testing the cylinder regularly. Various specifically regulations and standards for each country have to be observed.

This machine has two different functions (Small volume and High volume). This allows to test various type of cylinders.

The machine equipped with a mechanically driven high pressure pump. The water is fed directly out of the main. Test cylinders are filled completely with water by means of the mains water pressure. The roll front should be closed after water is running out without any bubbles. After closing the roll front, operator can press the "start" button. After reaching the test pressure, the pressure transformer is cut off by a pre adjust contact switch at the pressure gauge.

As the system is working mechanically, machine uses only water. (Oil free system).

Hydro Test(M-01) is equipped with dual security mechanism. It stops automatically when a problem occurs. Also emergency button is attached to the machine. If there is a problem, operator can press it manually to stop the machine.

A computer system is attached to Hydro Test (M-01) so the customer can easily take computer outputs for every test. System will give reporting opportunities. By the advantage of this special feature, testing operation can be controlled more easily, efficiently and faster.